.jpg)
You have no items in your shopping cart.
$199.98
Woodys Sno-Cross Competition Flat-Top Wear Rods for C&A Pro & Curve Ind. Skis Only - SCC-5000
A full range of carbide wear rod choices for the casual trail rider to the serious rider with a heavily studded track and even for Sno-Cross competition
Carbide types prevent the rear of higher horsepower performance machines from pushing the front, especially on icy trails
Rears are angle-cut for easier unloading and backing up
Ten inches of 60º turning carbide
Hefty 1/2 in. diameter host rod and 3/8 in. studs
Sold in pairs
Fastening nuts included
NOTE:
Fits C&A Pro & Curve Industries Skis
NOTE:
Plastic Specialties Skis
Ultra III/Ultra Flex
NOTE:
Some models require drilling extra holes in skis to mount carbides. It is recommended that you remove any paint from the studs before use by wire-brushing
Dimensions:
Length 17-1/4 in.
Diameter: 1/2 in.
Stud Diameter 3/8 in.
Stud Length: 2 in.
Number of Studs: 4
Stud Center Mounting Distance From:
Front to 1st: 1 in.
1st to 2nd: 4 in.
2nd to 3rd: 6-3/4 in.
3rd to 4th: 4-1/2 in.
4th to End: 1 in.
Included Items:
(2) Black steel wear rods with 10 in. carbide
(8) 3/8"-16 flanged nyloc nuts
A full range of carbide wear rod choices for the casual trail rider to the serious rider with a heavily studded track and even for Sno-Cross competition
Carbide types prevent the rear of higher horsepower performance machines from pushing the front, especially on icy trails
Rears are angle-cut for easier unloading and backing up
Ten inches of 60º turning carbide
Hefty 1/2 in. diameter host rod and 3/8 in. studs
Sold in pairs
Fastening nuts included
NOTE:
Fits C&A Pro & Curve Industries Skis
NOTE:
Plastic Specialties Skis
Ultra III/Ultra Flex
NOTE:
Some models require drilling extra holes in skis to mount carbides. It is recommended that you remove any paint from the studs before use by wire-brushing
Dimensions:
Length 17-1/4 in.
Diameter: 1/2 in.
Stud Diameter 3/8 in.
Stud Length: 2 in.
Number of Studs: 4
Stud Center Mounting Distance From:
Front to 1st: 1 in.
1st to 2nd: 4 in.
2nd to 3rd: 6-3/4 in.
3rd to 4th: 4-1/2 in.
4th to End: 1 in.
Included Items:
(2) Black steel wear rods with 10 in. carbide
(8) 3/8"-16 flanged nyloc nuts
