Upgrade your repair and maintenance projects with the Permatex Optimum Grey Easy-Disassembly Gasket Maker. Now featuring an innovative Easy-Disassembly formula, this gasket maker reduces the time it takes to disassemble engines or parts. Apply it as you normally would, and when it's time to take components apart, simply loosen them and peel away the gasket maker with your fingers—it's that easy!

Designed for maximum rigidity and to withstand high torque loads and vibration resistance, this gasket maker is typically used in import vehicles with closer bolt hole spacing. It's the premium option for coolants, especially post DEX-COOL, and is perfect for high vibration and high torque applications such as valve covers, water pumps, intake manifold end seals, and thermostat housings.

The Permatex Optimum Grey is a single-component, room-temperature vulcanizing (RTV) silicone gasketing compound that cures on exposure to moisture in the air to form a tough, flexible silicone rubber gasket. It resists aging, weathering, and thermal cycling without hardening, shrinking, or cracking. With a high-temperature resistance of up to 700°F intermittent, it's the most advanced high-performance RTV gasket maker available.

---

Item Specifics:

• Brand: Permatex
• Product Name: Optimum Grey Easy-Disassembly Gasket Maker
• Size: Case of 12 3.35 oz Tubes
• Features:
  • Easy to Disassemble: Reduces time needed to disassemble parts.
  • Maximum Rigidity & Vibration Resistance: Designed for maximum torque load and to withstand vibration.
  • Leak Protection: Protects against leaks caused by vibration and thermal expansion.
  • OEM Specified: Meets original equipment manufacturer specifications.
  • Low-Odor, Non-Corrosive Formula: Safe for use on all metals; sensor-safe.
• Product Benefits:
  • High-temperature resistance (up to 700°F intermittent)
  • Sensor-safe and non-corrosive
  • Superior adhesion and flexibility
  • Replaces most cut gaskets
  • Improved oil resistance
  • Can be used as a gasket maker or dressing
  • Non-flammable and non-toxic
  • Low odor
• Suggested Applications:
  • Valve covers
  • Water pumps
  • Intake manifold end seals
  • Thermostat housings
  • Pumps
  • Compressors
  • Exhaust manifolds/headers
  • Oil pans
  • Gearboxes

---

Directions for Use:

For Assembly as Form-in-Place Gasket:

1. Prepare Surfaces: Remove all previous material from mating surfaces. For best results, clean and dry all surfaces with a residue-free solvent like Permatex® Brake and Parts Cleaner.
2. Cut Nozzle: Cut the nozzle to the desired bead size (1/16" to 1/4" in diameter).
3. Apply Gasket Maker: Apply a continuous and even bead of silicone to one surface, encircling all bolt holes.
4. Assemble Parts: Immediately assemble parts while silicone is still wet. Secure or tighten to recommended torque specs.
5. Curing: Re-torque will not be necessary after the product has cured.

For Assembly as a Gasket Dressing:

1. Prepare Surfaces: Repeat cleaning steps as above.
2. Apply Thin Film: Apply a thin film of silicone to one surface to be sealed.
3. Position Gasket: Place the pre-cut gasket onto the silicone film.
4. Seal Gasket: Apply a second thin film to the pre-cut gasket surface.
5. Assemble Parts: Remove any excess and assemble parts immediately.

Note: Not recommended for use as a cylinder head gasket or head gasket sealant.

---

Storage of Unused Product:

• Silicone Plug Method: Allow excess material to extend beyond the nozzle to form a cured "silicone plug" that seals the product. Remove cured silicone when ready to reuse.
• PowerBead Dispensers: Use the included plastic cap or the silicone plug method for storage.

Cleanup:

• Uncured Product: Remove from parts and tools with Permatex® Fast Orange® Wipes or Hand Cleaners.
• Cured Product: Break the film with a dry cloth and remove as much as possible. Use Permatex® Gasket Remover for remaining material.
• Hands: Clean with a dry cloth or Permatex® Fast Orange® Hand Cleaner.

Enhance your maintenance efficiency with Permatex Optimum Grey Easy-Disassembly Gasket Maker—seals strong and removes fast for a hassle-free experience!

Portions of case may possibly ship from separate warehouses.