.jpg)
You have no items in your shopping cart.
$42.95
Stock image. The flange and clamp may vary from the image.
A rubber mounting flange adapter made by Mikuni.
Designed for VM‑series round‑slide carburetors , especially the VM36 (36 mm bore).
Serves as the interface between the carburetor’s spigot and a flange‑mount intake manifold.
Key Specifications
Flange compatibility : Fits VM36 carb bores between 36–40 mm and spigot outer diameter of \~ 43 mm .
Bolt‑hole spread : Approximately 70 mm center‑to‑center
Throat depth : Around 25 mm
Material : Made of rubber , color typically black
Included : Usually comes with a hose clamp for securing the flange.
Use Cases
Ideal for adapters tying a spigot‑style carburetor to a flange‑style manifold , common on Harley‑Davidson , Indian , ATV , snowmobile , or dual‑sport motorcycle setups.
Frequently used when converting a stock VM36 to a rubber‑mounted intake to reduce vibration or fit non‑OEM manifolds.
Made in Japan
Compatibility Summary
| Feature | Spec |
| --------------- | ---------------------------------- |
| Carburetor type | Mikuni VM-series (especially VM36) |
| Carb bore | 36–40 mm |
| Spigot OD | \~43 mm |
| Bolt spacing | \~70 mm |
| Throat depth | \~25 mm |
| Material | Rubber (black) |
| Includes | Clamp |
Why It Matters
1. Isolation – Rubber flange absorbs vibration, protecting carb internals.
2. Flexibility – Allows “spigot” carbs like VM36 to fit on flange‑mount manifolds.
3. Sealing – Provides a tight seal under varying heat and movement conditions.
4. OEM quality – Genuine Mikuni piece, reliable replacement or upgrade with consistent fit.
Summary
The Mikuni M‑VM36‑200K is a high‑quality, rubber mounting flange adapter for VM36 carburetors, supporting conversions or custom builds where VM carbs meet flange‑mount manifolds. Built to OEM standards in Japan, it’s widely available and affordable—essential for riders customizing intake setups.
A rubber mounting flange adapter made by Mikuni.
Designed for VM‑series round‑slide carburetors , especially the VM36 (36 mm bore).
Serves as the interface between the carburetor’s spigot and a flange‑mount intake manifold.
Key Specifications
Flange compatibility : Fits VM36 carb bores between 36–40 mm and spigot outer diameter of \~ 43 mm .
Bolt‑hole spread : Approximately 70 mm center‑to‑center
Throat depth : Around 25 mm
Material : Made of rubber , color typically black
Included : Usually comes with a hose clamp for securing the flange.
Use Cases
Ideal for adapters tying a spigot‑style carburetor to a flange‑style manifold , common on Harley‑Davidson , Indian , ATV , snowmobile , or dual‑sport motorcycle setups.
Frequently used when converting a stock VM36 to a rubber‑mounted intake to reduce vibration or fit non‑OEM manifolds.
Made in Japan
Compatibility Summary
| Feature | Spec |
| --------------- | ---------------------------------- |
| Carburetor type | Mikuni VM-series (especially VM36) |
| Carb bore | 36–40 mm |
| Spigot OD | \~43 mm |
| Bolt spacing | \~70 mm |
| Throat depth | \~25 mm |
| Material | Rubber (black) |
| Includes | Clamp |
Why It Matters
1. Isolation – Rubber flange absorbs vibration, protecting carb internals.
2. Flexibility – Allows “spigot” carbs like VM36 to fit on flange‑mount manifolds.
3. Sealing – Provides a tight seal under varying heat and movement conditions.
4. OEM quality – Genuine Mikuni piece, reliable replacement or upgrade with consistent fit.
Summary
The Mikuni M‑VM36‑200K is a high‑quality, rubber mounting flange adapter for VM36 carburetors, supporting conversions or custom builds where VM carbs meet flange‑mount manifolds. Built to OEM standards in Japan, it’s widely available and affordable—essential for riders customizing intake setups.
