Klock Werks Flare® Windshield - 8" - Carbon Fiber - '22-'26 FXLRST
KWW-02-0636
Features the Flare® aerodynamic profile combined with carbon fiber construction for durable performance and a distinctive appearance
The Flare® design redirects airflow for improved wind protection and stability while helping improve audio clarity
Carbon fiber offers exceptional strength and durability with resistance to impact
Riders must choose a size of carbon fiber windshield they can see over. Carbon fiber shields are opaque and cannot be seen though
Use only gentle cleaners like Shine Werks or mild soapy water to protect the tint and coating. Harsh ammonia, alcohol or solvent-based cleaners like Windex can strip wax and UV protection. If using dish soap, always follow up with a wax-based cleaner like Shine Werks to maintain performance.

Flare® Windshield Cleaning Do’s and Don’ts

Do:

• Use water or a gentle or mild cleaners 
• Wipe with a clean microfiber or soft cotton cloth
• Rinse thoroughly before wiping to remove dirt, grit, and bugs
• Clean the windshield regularly to prevent buildup
• Store your cloth in a clean, dry place to keep it free from debris

Don’t:

• Use ammonia-based, alcohol-based, petroleum-based, areosol, or solvent-based cleaners such as Windex™ or typical household glass and degreasing sprays. These can cause damage to polycarbonate or protectant over time 
• Wipe debris across the surface without rinsing first
• Use paper towels, shop rags, or any rough or abrasive materials
• Apply excessive pressure or scrub in circles

Our Low Rider ST Flare® Windshields are designed to fit stock fairings. Some aftermarket fairings may require modifications for proper installation.

Any modifications to risers that decreases clearance, may cause interference. 

NOTE: Using windshield hardware other than OEM, may cause undue wear to  grommets. Grommets will not be warrantied if used with aftermarket hardware.

Specs

Product Name	Windshield
Model	Flare®
Material	Carbon Fiber
Height	8"
Units	Each
Riding Style	Street

2022-2026

Harley-Davidson

FXLRST Low Rider ST 117

How to Clean Your Flare® Windshield

Step One: Rinse First

Start by rinsing the windshield with clean water. This removes surface debris that could scratch the polycarbonate if rubbed in during wiping.

Step Two: Use a Gentle, Plastic-Safe Cleaner

Avoid household cleaners that contain ammonia, alcohol, or other harsh solvents. These can cloud or damage your windshield over time. Instead, choose a gentle cleaning solution that is safe for polycarbonate materials. Products like Klock Werks' Shine Werks are specially formulated to clean plastic surfaces effectively without causing harm, while also leaving behind a clear, protective finish.

Step Three: Use a Soft Cloth

Choose a clean microfiber or soft cotton cloth. Do not use anything abrasive or dirty. Even small particles can leave visible scratches.

Step Four: Spray and Wipe

Spray your gentle cleaning solution directly onto the windshield or onto your cloth. Wipe using light pressure in straight lines. Avoid circular motions, and flip your cloth often to prevent spreading grime.

Step Five: Buff and Protect

Once the surface is clean, use a dry part of your cloth to lightly buff the windshield. A good plastic-safe cleaner will leave a smooth, protective finish that helps resist dust and moisture while maintaining a clear view of the road.