.jpg)
You have no items in your shopping cart.
$169.95
Kits come complete with everything needed for fast and easy installation - four-level power controller with adjustable-intensity LEDs, two heater inserts, hardware and wire-threading tool
Replace half of the OEM clutch or brake perch (unless noted)
Work with most grips and with or without electronic throttle
Heating unit mounts inside the handlebar
Maximum length for wires through the bars is 55 in.
Available with chrome or black finish
Made in the U.S.A.
NOTES:
Handlebars must have 7/8 in. i.d. to properly install.
Not to be used with aluminum handlebars.
Will not fit models with handlebar air reservoirs.
Included Items:
(1) Two wire heater (yellow/white)
(1) Five wire heater (yellow/white/green/red/black)
(1) Two wire heater on aluminum sheet with adhesive backing
(1) Black control switch with four wire leads (green/yellow/white/black)
(1) Power wire (red/black)
(2) Red locking splice connectors
(4) Red plastic buttons
(2) Yellow plastic buttons
(1) Black rubber grommet
(4) 5 1/2 in. black plastic cable ties
(1) Black plastic wire threader tool
Instructions
Replace half of the OEM clutch or brake perch (unless noted)
Work with most grips and with or without electronic throttle
Heating unit mounts inside the handlebar
Maximum length for wires through the bars is 55 in.
Available with chrome or black finish
Made in the U.S.A.
NOTES:
Handlebars must have 7/8 in. i.d. to properly install.
Not to be used with aluminum handlebars.
Will not fit models with handlebar air reservoirs.
Included Items:
(1) Two wire heater (yellow/white)
(1) Five wire heater (yellow/white/green/red/black)
(1) Two wire heater on aluminum sheet with adhesive backing
(1) Black control switch with four wire leads (green/yellow/white/black)
(1) Power wire (red/black)
(2) Red locking splice connectors
(4) Red plastic buttons
(2) Yellow plastic buttons
(1) Black rubber grommet
(4) 5 1/2 in. black plastic cable ties
(1) Black plastic wire threader tool
Instructions
