Convert your cable driven clutch to a hydraulic actuated setup with this Joker Machine Hydraulic Clutch Actuator. This part takes the place of your existing transmission side cover on your Harley big twin along with the ball & ramp setup to actuate your clutch push rod. The hydraulic setup provides a smoother, more consistent clutch feel. This kit comes with everything necessary to bolt on to your transmission. You will need an 11/16" bore clutch master cylinder and a standard brake line with AN-3 fittings. Joker Machine designed this side cover to be only 1 3/4" wide to avoid exhaust clearance issues as seen with other side covers. Fully CNC-machined, this beauty is cut, polished, and then finished.

• Machined from 6061 T-6 aluminum, then polished and chrome-plated
• Thickness is only 13/4" to give your bike clean lines and reduce exhaust pipe clearance issues
• Includes all necessary chrome mounting hardware including an AN-3 hydraulic line fitting
• Super easy line bleeding is possible due to recessed "Speed Bleeder" type bleed screw - just loosen screw half a turn, pump the master cylinder lever until adequate pressure is achieved, then re-tighten
• Excellent combo when used with Joker Machine clutch master cylinder assemblies or other 11/16" bore master cylinder
• Internals include a hard anodized piston for smooth action and long life
• Includes all mounting hardware, except hydraulic line
• Chrome finish
• Smooth design
• Made in the U.S.A.

Fits:

2007-13 Harley touring models, 2007-17 Harley Softail models (except 2016-17 FLSS/FLSTFBS) & 2006-17 Harley Dyna models