Take "cable calculation" headaches out of swapping handlebars
Kit includes the correct length cables, brake lines and wire extensions you need so you can complete a handlebar swap
Stainless braided kit includes throttle cable, idle cable (unless noted), clutch cable, brake lines, chrome "T" brake line junction, banjo bolts, fittings and copper crush washers
Made in the U.S.A.
Kit is based on using 2" risers with Ape Hanger handlebars.

LA Choppers Stainless Braided Handlebar Cable and Brake Line Kit for Use w/12 in. - 14 in. Ape Hangers w/o ABS
(For models listed w/o ABS)
The simple way to complete a handlebar swap
Kits give you the correct length stainless braided cables and brake lines you need so you can complete a handlebar swap, install the new cables/brake lines and ride
Throttle-by-wire (TBW) kits include clutch cable, brake lines, chrome T brake line junction, banjo bolts, fittings and copper crush washers
Includes wire extensions
Made in the U.S.A.

Included Items:
(1) Clear vinyl throttle cable, measures 38 3/4 in. housing, 3 1/4 in. 90 degree elbow and 5 1/2 in. travel
(2) Brass barrels
(1) Clear vinyl idle cable, measures 39 in. housing, 3 1/4 in. 90 degree elbow and 5 1/4 in. travel
(1) Clear vinyl clutch cable, measures 73 1/4 in. housing and 7/8 in. travel
(1) Black plastic barrel
(1) Black rubber boot
(1) 51 in. clear brake line with (1) 3/8 in./10mm 45 degree banjo and (1) 7/16 in. 90 degree banjo
(1) 3/8 in.-24 banjo bolt
(1) 7/16 in.-24 banjo bolt
(2) 3/8 in./10mm brass crush washers
(2) 7/16 in. brass crush washers
(1) 73 in. black braided cable wrap
(2) 18 in. black shrink tubing
(18) 24 in. wires
(1) 20 in. black heat shrink tubing
(14) Male spade connectors
Instructions